2010 PRICE LIST

Effective January 10, 2010



GENERAL SHOP RATE FOR LABOR (special projects) :  $42.50 per hour



REGRIND / REFURBISH:

~  Escomatic D6 Tool Post Assembly #D6-9-145:    $475. includes plating, grinding, honing, polishing and needle bearings.  Other parts extra.   4 or more, $425. each.

~ Tool cones #D2-r-1832:   Reground,  $375. each; $325. each for 3 or more.

~ Thrust Bearing Races #D2-r-547: Reground, $75. set up fee, plus $75. ea. pc., any quantity.

~ Drive Couplings #D6-9-56:  Refurbished with new heat treated sleeves,   Set up fee $75. plus $325. ea. any quantity.

~ Drive Couplings #D6-7-57:  Refurbished with hard chrome and reground, $350.

~ Collet Gears  #D6-8-965/1, #D4-x-2563, #D4-t-2033:     Reground,  $85.00 ea.; 6 or more, $70. each

~ Feed and Hold Collet Closing Levers  #D6-9-242, #D6-9-243:  Reworked, $135. ea.; 6 or more, $110. each

~ D6 Roller Stops on Feed and Return Arm Assembly  #D6-3-203:  Reground, $30. ea.; 6 or more, $25. each

~ Clutch Face Plate Gear  #D6-2-1141: Reground, $75. each.

~ Collet Closing and Opening Lever Pins  #D6-3-280:  Reground, $15. each.

~ D2/D4 Stock Clamping Jaws  #ARD-d-16 and #ARD-d-2:  Reground set, $75.

~ Reground Pusher Rings #D6-8-1255: $25. each (6 pc. minimum)

~ Drill Spindle End Caps & Mating Bearing Race  #D6-8-950a, $150.; and D4-t-2238, $100. ea. reground.

~ Index Clutches #D4-u-1918, #D4-u-2360, and #D6-8-1015: $75. set up fee, plus $125. each piece, reground;  4 pieces or more, $100. each.

Have another part you wish could be refurbished?  Let's talk.


REPLACEMENT PARTS:

~ Brass Plug Thread Protectors #ARD-c-59/2, #D6-3-1305, #D4-t-402:  $.25 each.

~ D4 Fiber Gear Shaft #D4-t-mp138, complete with needle bearing and nut, $259.; 3 for $225. each.

Without needle bearing, $219.

~ Fiber Gear Shaft Nuts #D4-t-2329:  $20. each.

Give us the opportunity to quote any Escomatic replacement part you're looking for.


HAND TOOLS:

~ T-handles for tool adjustments #S101-2.5, #S101-3.0:  $20. each.

~ T-handles for D4 Fibergear Shaft Nuts #S100:  $49. each

~ Thumb Wrench used for easier removal of D6 tool holders #S105-3.0:  $20.00 ea.


ESCOMATIC LAYOUTS:

~ D2, D4:   $150

~ D6:          $175



CNC CAM CUTTING (non-heat treated):
Numbers provided must be legible for each cam.
Normal turnaround time for cams and layouts is 10 business days*.

~ Extraction fee if only layout is provided:  $25 for each cam.

~ Feed cams: $29.50 ea.

~ D2 collet cams: $39.50

~ All D4, D6 & Swiss-type machines (Tornos, Bechler, Peterman, Gibbs etc.), flat cams 125mm and under:  $25.50 ea.

~ D6 Straightener Return Cams, heat treated:
    .8° /1mm.  - $125. ea.
  1.0° /1mm.  - $125. ea.
  1.5° /1mm.  - $125. ea.



All Content Copyright  2008 - 2010
Anita M. Golden
--All Rights Reserved--
email me